Guides · without a wearable

Fall detection without a wearable: how radar works

Yes, fall detection can work with nothing worn at all. A radar sensor mounts on the wall and detects a fall on its own. Your parent wears nothing, charges nothing, and has nothing to remember. If your family has already had the pendant argument, and lost, this page is the way out of it.

5 min readGuide

Why the wearable ends up in a drawer

Ask families why the medical alert pendant stopped working and the answer is rarely technical. It felt stigmatizing. It was uncomfortable at night. It sat on the charger during the shower, which is exactly when it was needed. It was forgotten on the dresser on the one day it mattered. A wearable only protects while it is worn, and wearing is a daily habit you are asking an independent parent to adopt forever. Many simply will not, and a refused or forgotten device protects nobody. That is the problem non-wearable fall detection exists to solve.

How radar detects a fall with nothing worn

The sensor sends out a radio signal that bounces off people in the room. From the returning signal it can tell whether someone is moving, where they are in the room, and whether they are up or lying still. It can also detect the sudden movement pattern of a fall. There is no lens and nothing is worn. Silvie uses this radar sensing to monitor movement, breathing, and positioning in the room, with no cameras and no microphones. For the general mechanics, see what is fall detection and how it works.

Three ways to go wearable-free, and the difference that matters

Wall buttons and voice activation. Help buttons on walls, or a speaker your parent calls out to. Wearable-free, yes, but your parent still has to act after a fall: reach a button or say the phrase clearly. A fall that leaves them unable to move or speak leaves them unprotected, and buttons only exist where someone predicted a fall might happen.

Cameras. Automatic detection with nothing worn, paid for in privacy: a lens in the home and footage that exists. Many parents refuse this outright. If the camera is your family's sticking point, read fall detection without a camera.

Radar sensors. Automatic detection, nothing worn, nothing to press or say, and no image made. The sensor is already sensing movement in the room. Detection does not depend on your parent being able to press or say anything at all. This is the category Silvie is in. It is the only one of the three that asks nothing of your parent in the moment and nothing of their privacy at home.

What happens when a fall is detected

Silvie sends a push alert to the family contacts you chose, who check in and respond. In the app, contacts can review the alert and mark it True Fall, False Alarm, or Not Sure. They can add notes and call from their own phone. The app keeps an event record: the fall history, where in the home it happened, how long it lasted, and the activity timeline around it. Between alerts, the app shows daily activity, so you can see your parent is up and moving through a normal day. It helps to agree a response order in advance: who responds first, and who is the backup.

Coverage: the bathroom and the night, covered

Each sensor covers the room it is installed in. Start with the bathroom, bedroom, and main living area. Those choices matter for this problem specifically. The bathroom is where wearables come off and where hard surfaces make falls dangerous; a wall sensor covers it without a camera. The bedroom is where a pendant feels most intrusive and gets taken off; the sensor covers it without asking anything of your parent. Setup is mount the sensor, plug it in with the adapter and cable in the box, connect to Wi-Fi, and follow the app.

Questions to ask before you choose a non-wearable system

  • Is detection automatic, or does my parent still have to press or say something?
  • Does it make images, video, or audio recordings?
  • Which rooms are covered, and what does covering this home take?
  • Who receives the alert, and what can they do from their phone?
  • Who responds first when an alert comes in, and who is the backup?
  • What does the company say about setup: wiring, Wi-Fi, installation help?

Our full checklist is in how to choose a fall alert device,.

Where Silvie fits

Silvie is radar fall detection built for exactly this refusal: no wearable, no camera, nothing for your parent to do. It is made by Pontosense, a Canadian company, for homes in Canada and the United States. See how Silvie works, look at the Silvie kit, or read about Founding Families if you are joining early.

FAQs

Yes. A wall-mounted radar sensor detects a fall on its own. Nothing is worn, charged, or remembered, and your parent does not have to press a button or call out.
It is sometimes called contactless or passive fall detection. Instead of a device on the body sensing the fall, a sensor in the room does it. Radar is one contactless method; cameras are another.
A pendant senses a fall from the body, so it only works while it is worn. Radar senses the room, so it keeps sensing while your parent is in a covered room. That includes night and the bathroom, where pendants come off.
Yes, if a sensor is installed there. Radar makes no image, which is what makes a sensor acceptable in a bathroom in a way a camera is not.
Nothing. The sensor detects the fall and Silvie sends a push alert to the family contacts you chose, who check in and respond.
Silvie makes no images, video, or audio. It keeps event records in the app: fall history, where in the home a fall happened, how long it lasted, and the activity timeline.
The family contacts you invite can review each alert in the app and mark it True Fall, False Alarm, or Not Sure, and add notes.
Mount the sensor, plug it in with the adapter and cable in the box, connect to Wi-Fi, and follow the guided setup in the app. No special wiring is needed. Each sensor covers the room it is installed in.

Fall detection without a camera

A small sensor on the wall, with nothing to wear. Or join the Founding Families.

Shop Silvie